![]() Make sure the SSR will protect the 5V line from Back EMF as there is a coil in the relay. You will need to supply extra relays like the one shown here: Or you can find SSRs (Solid State Relays) that will accept 5v to drive the relay coil. Additional Information: You can also connect other high powered devices to the breakout board using any of the output terminals. The live and ground wire would be uncut and travel from the plug to the router. Image of the relay terminal: The live/black wire would be cut and one end of the cut would be secured into the P terminal and the other cut end would be secured into the S terminal. You will need to remove a portion of the outer jacket of the extension cord to expose the white, black and green wires (white = neutral, black = live and green = ground), understanding that the neutral and live create the completed circuit. Here is how to connect your router to the parallel breakout board through the on-board relay.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |